|
|
Horizontal driven roller conveyor
Kozelek, Petr ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deal with the construction proposal of driven horizontal roller conveyor for transportation of europallets with loads 175 kg. Part of this thesis is functional calculation of roller conveyor, determination of main parameters of conveyor, calculation of solidity of shaft and shell of driving roller, design and control of frame. The thesis contains drawing documentation of conveyor assembly, conveyor section assembly, driving roller assembly and detailed drawings of shaft and shell of driving roller.
|
|
|
Horizontal driven roller conveyor for a transport of the storage
Novák, Adam ; Hloska, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
This thesis deal with proposal of driven horizontal roller conveyor for storage drive, that the will transport metal material in range of storage and pallet drive. Aim of this thesis is functional calculation of roller conveyor, determination of main parameters of conveyor, calculation of solidity of shell of driving roller and shaft, design and control of frame. The thesis contains drawing documentation of conveyor assembly, conveyor section assembly, driving roller assembly and detailed drawings of shaft and shell of driving roller.
|
|
|
Electric drive for motorcycles
Černošek, Martin ; Kloss, Ondřej (referee) ; Kaplan, Zdeněk (advisor)
The diploma thesis is focused on rebuilding of the combustion engine powered motorcycle to the electromotor powered motorcycle. In the thesis is chosen the suitable electromotor, next is designed the accumulator system, then is created the construction design of location electric system in the motorcycle frame and at the end is made the strength analysis of the mechanical parts. For the construction design is created 3D model in SolidWorks. The diploma thesis is also focused on comparison the motorcycle powered by combustion engine and the motorcycle powered by electromotor in the Supermoto race.
|
|
|
Horizontal driven roller conveyor
Hájek, Lukáš ; Jonák, Martin (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the design-driven horizontal roller conveyor 15 m long which is used for the transport of cardboard boxes with metal material in a storeroom. A total weight of this box is 35 kg. The conveyor is functionally calculated and its main dimensions are determined. There is designed draft power, strength calculations chain, frame and strut trails. The set of drawing line, drawing section, drawing drive and manufacturing drawing sidewall are treated as a drawing documentation.
|
|
|
Driven horizontal roller conveyor of ceramic lines
Stoklásek, Tomáš ; Malášek, Jiří (referee) ; Kašpárek, Jaroslav (advisor)
The aim of this bachelor thesis is the design of roller conveyor for transportation of loads weighing 500 kg using EURO pallets. The thesis contains functional calculation and determination of main parameters of roller conveyor. Next task of thesis is calculation of driving roller shaft and shell solidity. Attachment includes drawing documentation of roller shaft and shell assembly of the roller, one conveyor section and entire conveyor route.
|
|
|
Chain Conveyor
Štěpán, Marek ; Dlesk, Daniel (referee) ; Škopán, Miroslav (advisor)
The aim of this diploma thesis is to design the control picking unit for the storage system Multitower. This work deals with the storage of rods, safety requirements and design of structures. The design part solves the actuator design, choice of chain tensioning system and torque transmission. The strength analysis of important components is solved in last part.
|
|
|
Driven roller conveyor
Pokorný, Pavel ; Kašpárek, Jaroslav (referee) ; Pokorný, Přemysl (advisor)
The thesis describes design of driven roller conveyor for transport products on Euro pallets of a total maximum weight of 600kg. The design includes determination of the respective sizes, capacities and strength, as well as design of a support frame and final strength control in the most affected areas. The thesis also contains documentation with drawings of complete conveyor, section of the conveyor and last section of the conveyor.
|
|
|
Cordless drill powered hobby car
Valla, Tomáš ; Böhm, Michael (referee) ; Štětina, Josef (advisor)
This bachelor thesis deals with the design of a cordless drill powered hobby car. The cordless drill must remain usable for normal use. The theoretical part deals with the description of the historical development of childrens’ cars from the first manufactured models to modern pedal and electric carts. The next section describes the origin of cordless drills. The following section shows today's options for purchasing prams. The market has greatly enriched, and it is practically impossible not to choose. The construction part is focused on the design of individual components and a list of purchased parts. It also includes basic calculations for the selected chain and the designed structure.
|
|
|
Driven roller conveyor
Straka, David ; Jonák, Martin (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor' s thesis deals with a structural draft of horizontal powered roller track for stock transportation of carton boxes. The trajectory is thought as non storage. The focus of this study is functional computation of the trajectory, determining of main track dimensions, strength computation of operational conveyer parts, draft and examination of track frame. This study includes draft documentation of: track draft, sections of track draft, powered roller and its build, comprehensive tracing of the powered rollers coating and axis.
|
|
|
Roll assembly system for automatic strapping
Havelka, Michal ; Marek, Tomáš (referee) ; Knoflíček, Radek (advisor)
This bachelor’s thesis is dealing with the design of system for rolls of technical textiles, which assembles them into horizontal layer. Possible structural drafts are mentioned here and one selected draft is solved. For the first I am dealing with major dimensions, the choice of rollers, calculation of the required engine power and the calculation of the chain drive. Finally I calculated pneumatic cylinders and checked the deflection of used rollers.
|
guest ::
